The main functions of a snowblower are to cut and hold large masses of snow.

The snow guard is one of the main elements that provides the roof. The main function of the snow catcher is to brake the snow that slides down the slope of the roof.

The crescent snow retainer is one of the main elements of the roof. The main function of the snow catcher is to brake the snow that slides down the slope of the roof.

Wind protection for filing. An element that is attached to the sides of the slope along the slope performing the functions of wind protection and sewing strips.

Universal skate serves to prevent the penetration of rain and melt water into the attic space. Provides the necessary air exchange, thereby preventing the impact of moisture on the roof elements.

Decorative skate is used to prevent the penetration of rain and melt water into the attic space and to ventilate the roof. Provides the necessary air exchange, thereby preventing the impact of moisture on the roof elements.

Decorative protective element, covering the counterlat and patch, puts the roofing film or membrane in the gutter.

The small skate cap is a decorative element that closes the end of the skate and gives it an aesthetic and complete look.

Flat gutter is a structural element of the roof, which is attached to the internal joints of the slopes, mounted under the roofing material.

The flat skate serves to prevent the penetration of rain and melt water into the attic space. Provides the necessary air exchange, thereby preventing the impact of moisture on the roof elements.

Gutter cover. An element that is mounted on top of the gutter closing the sections of roofing material.

Wall protection, which is cut into the wall, is used to treat the joint of the roof plane with the wall of an adjacent building or chimney, prevents water from entering the attic space.

Wall protection, used to treat the joint of the roof plane with the wall of an adjacent building or chimney, prevents water from entering the attic space.

Stitching lath – a decorative lath that covers the ends of the slopes (rafters), is used in cases where there is no roof filing.

The internal corner is a decorative element which is used at processing of internal corners.

The outer corner is a decorative element used in the treatment of outer corners.

The sewing bar is universal – it is an element that closes the rafters and the front board in case of unforeseen filing. Also, it serves as a support for the binder and closes its end.